Journal of the Global Power and Propulsion Society

The Journal is devoted to the advancement of the science and technology of power generation and propulsion systems through the dissemination of original archival papers contributing to advancements in turbomachinery based technologies.

ISSN: 2515-3080 (online)
Special Issue May 2021


Latest Publications
2021 vol. 5
 
 
ORIGINAL ARTICLE

Loss assessment of the axial-gap size effect in a low-pressure turbine
Marcel Oettinger, Dajan Mimic, Michael Henke, Oleg Schmunk, Joerg R. Seume
J. Glob. Power Propuls. Soc. 2021;5:1–14
DOI: https://doi.org/10.33737/jgpps/127834
 
Stats
Abstract
Article (PDF)
 
ORIGINAL ARTICLE

The required aerodynamic simulation fidelity to usefully support a gas turbine digital twin for manufacturing
Wen Yao Lee, William N. Dawes, John D. Coull
J. Glob. Power Propuls. Soc. 2021;5:15–27
DOI: https://doi.org/10.33737/jgpps/132007
 
Stats
Abstract
Article (PDF)
 
ORIGINAL ARTICLE

Investigation of the tip injection for stall control in a transonic compressor with inlet distortion
Wenqiang Zhang, Mehdi Vahdati
J. Glob. Power Propuls. Soc. 2021;5:28–38
DOI: https://doi.org/10.33737/jgpps/132006
 
Stats
Abstract
Article (PDF)
 
ORIGINAL ARTICLE

Aerodynamic investigation of a linear cascade with tip gap using large-eddy simulation
Koch Régis, Sanjosé Marlène, Moreau Stéphane
J. Glob. Power Propuls. Soc. 2021;5:39–49
DOI: https://doi.org/10.33737/jgpps/133601
 
Stats
Abstract
Article (PDF)
 
ORIGINAL ARTICLE

Improvement of corner separation prediction using an explicit non-linear RANS closure
Wei Sun, Liping Xu
J. Glob. Power Propuls. Soc. 2021;5:50–65
DOI: https://doi.org/10.33737/jgpps/133913
 
Stats
Abstract
Article (PDF)
 
ORIGINAL ARTICLE

Sensitivity analysis on the impact of geometrical and operational variations on turbine hub cavity modes and practical methods to control them
Vahid Iranidokht, Anestis I. Kalfas, Reza S. Abhari, Shigeki Senoo, Kazuhiro Momma
J. Glob. Power Propuls. Soc. 2021;5:66–78
DOI: https://doi.org/10.33737/jgpps/133736
 
Stats
Abstract
Article (PDF)
 
ORIGINAL ARTICLE

Stall margin improvement in a low-speed axial compressor rotor using a blockage-optimised single circumferential casing groove
Ahmad Fikri Mustaffa, Vasudevan Kanjirakkad
J. Glob. Power Propuls. Soc. 2021;5:79–89
DOI: https://doi.org/10.33737/jgpps/133912
 
Stats
Abstract
Article (PDF)
 
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2515-3080
Copyright © 2006-2021 Bentus All rights reserved.