Articles
2019 vol. 3
Influence of HTC levels on temperature and stress levels in a leading edge impingement system
J. Glob. Power Propuls. Soc. 2019;3:529–539
The sensitivity of turbine cascade endwall loss to inlet boundary layer thickness
J. Glob. Power Propuls. Soc. 2019;3:540–554
Purge flow effects on rotor hub endwall heat transfer with extended endwall contouring into the disk cavity
Dominic D. Hänni, Rainer Schädler, Reza S. Abhari, Anestis I. Kalfas, Gregor Schmid, Ewald Lutum, Nicolas Lecoq
J. Glob. Power Propuls. Soc. 2019;3:555–568
Parametric study on the aeroelastic stability of rotor seals
J. Glob. Power Propuls. Soc. 2019;3:569–579
Experimental Study on the Influence of the Streamwise Position of Film Hole Extraction in Internal Ribbed Cooling Channels of Turbine Blades
J. Glob. Power Propuls. Soc. 2019;3:580–591
Thermal Energy Storage For Gas Turbine Power Augmentation
Vasilis Gkoutzamanis, Anastasia Chatziangelidou, Theofilos Efstathiadis, Anestis Kalfas, Alberto Traverso, Justin N. W. Chiu
J. Glob. Power Propuls. Soc. 2019;3:592–608
Effects of Stator Platform Geometry Features on Blade Row Performance
J. Glob. Power Propuls. Soc. 2019;3:609–629
Superior fuel and operational flexibility of sequential combustion in Ansaldo Energia gas turbines
J. Glob. Power Propuls. Soc. 2019;3:630–638
Influence of Blade Aspect Ratio on Axial Compressor Efficiency
J. Glob. Power Propuls. Soc. 2019;3:639–652
Noise characteristics of a reduced blade count rotor with improved stage efficiency
Rainer Schädler, Dominic D. Hänni, Anestis I. Kalfas, Reza S. Abhari, Gregor Schmid, Ewald Lutum, Carsten Schneider
J. Glob. Power Propuls. Soc. 2019;3:653–667
Optimization of compressor stations
J. Glob. Power Propuls. Soc. 2019;3:668–674
Most read
