Topic Heat Transfer

 
ORIGINAL ARTICLE
 

Experimental study of turbine blade tip heat transfer with high-speed relative casing motion
Xu Peng, Shaopeng Lu, Hongmei Jiang, Wenbo Xie, Yongmin Gu, Chien-Pin Chen
J. Glob. Power Propuls. Soc. 2025;9:77-88
DOI: https://doi.org/10.33737/jgpps/202254
 
ORIGINAL ARTICLE
 

Implementation of cooling slots at the pressure side rims of squealer tips
Joao Antonio Coelho Vieira, John Coull, Peter Ireland
J. Glob. Power Propuls. Soc. 2024;8:421-435
DOI: https://doi.org/10.33737/jgpps/192452
 
ORIGINAL ARTICLE
 

1D analytic and numerical analysis of thin film heat transfer gauges and infra-red cameras in non-planar applications
Mark Baker, Budimir Rosic
J. Glob. Power Propuls. Soc. 2024;8:188-202
DOI: https://doi.org/10.33737/jgpps/185746
 
ORIGINAL ARTICLE
 

Influence of blowing ratio on double-wall cooling characteristics under the condition of high-temperature flue gas
Baichuan Yi, Yan Xiong, Zhigang Liu, Yan Liu, Xiaopo Wei
J. Glob. Power Propuls. Soc. 2024;8:177-187
DOI: https://doi.org/10.33737/jgpps/186673
 
ORIGINAL ARTICLE
 

Swirling flow field reconstruction and cooling performance analysis based on experimental observations using physics-informed neural networks
Weichen Huang, Xu Zhang, Hongyi Shao, Wenbin Chen, Yihong He, Wenwu Zhou, Yingzheng Liu
J. Glob. Power Propuls. Soc. 2024;8:141-153
DOI: https://doi.org/10.33737/jgpps/185745
 
ORIGINAL ARTICLE
 

High-fidelity CFD-trained machine learning to inform RANS-modelled interfacial turbulence
Bertolotti Luc, Richard Jefferson-Loveday, Stephen Ambrose, Evgenia Korsukova
J. Glob. Power Propuls. Soc. 2023;7:269-281
DOI: https://doi.org/10.33737/jgpps/166558
 
EDITORIAL
 

Editorial: Some advances in additive manufacturing for aerothermal technologies
Li He
J. Glob. Power Propuls. Soc. 2023;Special Issue: Some advances in additive manufacturing for aerothermal technologies:1-2
DOI: https://doi.org/10.33737/jgpps/168474
 
REVIEW ARTICLE
 

Fundamentals and recent progress of additive manufacturing-assisted porous materials on transpiration cooling
Ruina Xu, Zhilong Cheng, Peixue Jiang
J. Glob. Power Propuls. Soc. 2023;Special Issue: Some advances in additive manufacturing for aerothermal technologies:19-48
DOI: https://doi.org/10.33737/jgpps/166418
 
ORIGINAL ARTICLE
 

Aerothermal comparison of a diffuser hole and a slot geometry: thermal performance and jet stability
Katharina Stichling, Hans-Jörg Bauer
J. Glob. Power Propuls. Soc. 2023;7:211-221
DOI: https://doi.org/10.33737/jgpps/163087
 
ORIGINAL ARTICLE
 

Experimental investigation of the influence of film cooling hole diameter on the total cooling effectiveness for cyclone-cooled turbine blades
Dogan Bicat, Katharina Stichling, Maximilian Elfner, Hans-Jörg Bauer, Knut Lehmann
J. Glob. Power Propuls. Soc. 2023;7:200-210
DOI: https://doi.org/10.33737/jgpps/165825
 
ORIGINAL ARTICLE
 

Investigation of coupled radiation-conduction heat transfer in cylindrical systems by discontinuous spectral element method
Jiazi Zhao, Yasong Sun, Yifan Li, Changhao Liu
J. Glob. Power Propuls. Soc. 2022;6:354-366
DOI: https://doi.org/10.33737/jgpps/156350
 
ORIGINAL ARTICLE
 

1D analytic and numerical analysis of multilayer laminates and thin film heat transfer gauges
Mark Baker, Budimir Rosic
J. Glob. Power Propuls. Soc. 2022;6:238-253
DOI: https://doi.org/10.33737/jgpps/151660
 
ORIGINAL ARTICLE
 

Experimental and numerical investigations of mixed convection in turbine cavities for more flexible operations
Oguzhan Murat, Budimir Rosic, Koichi Tanimoto, Ryo Egami
J. Glob. Power Propuls. Soc. 2022;6:106-123
DOI: https://doi.org/10.33737/jgpps/150751
 
ORIGINAL ARTICLE
 

Numerical optimization study for the geometry of film cooling nozzle
Mohammad M. Alshehaby, Lamyaa El-Gabry
J. Glob. Power Propuls. Soc. 2022;6:39-60
DOI: https://doi.org/10.33737/jgpps/146614
 
ORIGINAL ARTICLE
 

Unsteady phenomena at the combustor-turbine interface
Faisal Shaikh, Budimir Rosic
J. Glob. Power Propuls. Soc. 2021;5:202-215
DOI: https://doi.org/10.33737/jgpps/143042
 
ORIGINAL ARTICLE
 

Experimental and computational investigation of flow structure of buoyancy induced flow in heated rotating cavities
Seyed Mostafa Fazeli, Vasudevan Kanjirakkad, Christopher Long
J. Glob. Power Propuls. Soc. 2021;5:148-163
DOI: https://doi.org/10.33737/jgpps/140595
 
ORIGINAL ARTICLE
 

Taylor-Couette-Poiseuille flow heat transfer in a high Taylor number test rig
Phillip B. Swann, Hugh Russell, Ingo H. Jahn
J. Glob. Power Propuls. Soc. 2021;5:126-147
DOI: https://doi.org/10.33737/jgpps/140252
 
ORIGINAL ARTICLE
 

RANS predictions of trailing-edge slot flows using heat-flux closures developed with CFD-driven machine learning
Chitrarth Lav, Ali Haghiri, Richard Sandberg
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1-13
DOI: https://doi.org/10.33737/jgpps/133114
 
ORIGINAL ARTICLE
 

Numerical Investigation of a High Momentum Jet Flame at Elevated Pressure: A Quantitative Validation with Detailed Experimental Data
Michael Pries, Andreas Fiolitakis, Peter Gerlinger
J. Glob. Power Propuls. Soc. 2020;4:264-273
DOI: https://doi.org/10.33737/jgpps/130031
 
ORIGINAL ARTICLE
 

Experimental Evaluation of Using Silica Aerogels as the Thermal Insulator for Combustor Liners
Yeongmin Pyo, Taylor Robertson, Sean Yun, Zekai Hong
J. Glob. Power Propuls. Soc. 2020;4:202-216
DOI: https://doi.org/10.33737/jgpps/129703
 
ORIGINAL ARTICLE
 

Calibrated Low-Order Transient Thermal and Flow Models for Robust Test Facility Design
Andrew Messenger, Thomas Povey
J. Glob. Power Propuls. Soc. 2020;4:94-113
DOI: https://doi.org/10.33737/jgpps/122270
 
ORIGINAL ARTICLE
 

Methodology for High-Accuracy Infrared Calibration in Environments with Through-Wall Heat Flux
Mathias Michaud, Francesco Ornano, Nafiz H. K. Chowdhury, Thomas Povey
J. Glob. Power Propuls. Soc. 2020;4:1-13
DOI: https://doi.org/10.33737/jgpps/118091
 
ORIGINAL ARTICLE
 

Experimental Study on the Influence of the Streamwise Position of Film Hole Extraction in Internal Ribbed Cooling Channels of Turbine Blades
Marlene Böttger, Martin Lange, Ronald Mailach, Konrad Vogeler
J. Glob. Power Propuls. Soc. 2019;3:580-591
DOI: https://doi.org/10.33737/jgpps/110621
 
ORIGINAL ARTICLE
 

Accelerated thermal profiling of gas turbine components using luminescent thermal history paints
Silvia Araguás Rodríguez, Tomáš Jelínek, Jan Michálek, Álvaro Yáñez González, Fiona Schulte, Christopher Pilgrim, Jorg Feist, Stephen J. Skinner
J. Glob. Power Propuls. Soc. 2018;2:344-361
DOI: https://doi.org/10.22261/S3KTGK
 
ORIGINAL ARTICLE
 

Turbine blade tip aero-thermal management: Some recent advances and research outlook
Qiang Zhang, L He
J. Glob. Power Propuls. Soc. 2017;1:271-287
DOI: https://doi.org/10.22261/K7ADQC
 
ORIGINAL ARTICLE
 

Effect of purge air on rotor endwall heat transfer of an axial turbine
Sebastiano Lazzi Gazzini, Rainer Schädler, Anestis I. Kalfas, Reza S. Abhari, Sebastian Hohenstein, Gregor Schmid, Ewald Lutum
J. Glob. Power Propuls. Soc. 2017;1:211-223
DOI: https://doi.org/10.22261/F29ZWY
 
REVIEW ARTICLE
 

Prediction of the windage heating effect in steam turbine labyrinth seals
Simon Hecker, Andreas Penkner, Jens Pfeiffer, Stefan Glos, Christian Musch
J. Glob. Power Propuls. Soc. 2017;1:84-94
DOI: https://doi.org/10.22261/ETJLRM
 
ORIGINAL ARTICLE
 

Tip gap size effects on thermal performance of cavity-winglet tips in transonic turbine cascade with endwall motion
Fangpan Zhong, Chao Zhou
J. Glob. Power Propuls. Soc. 2017;1:41-54
DOI: https://doi.org/10.22261/CR5JBC
 
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2515-3080
Journals System - logo
© 2006-2025 Journal hosting platform by Bentus
Scroll to top