Journal Home
About the GPPS Journal
Aims and Scope
International Advisory Board
Editorial Board
Publisher
Editorial Office
Indexing and Archiving
Journal Issues
Submissions
Submission Workflow
Editorial Policies
Publication Fees
Author Guidelines
Reviewer Guidelines
CrossMark, Correction and Retraction Policy
Ethics Statement
Indexing and Archiving
Terms & Conditions
Cookie Policy
Privacy Policy
Topic Axial Turbines
ORIGINAL ARTICLE
Coking of gas turbine lubrication oils at elevated temperatures
J. Glob. Power Propuls. Soc. 2023;7:242–256
EDITORIAL
Editorial: Some advances in additive manufacturing for aerothermal technologies
J. Glob. Power Propuls. Soc. 2023;Special Issue: Some advances in additive manufacturing for aerothermal technologies:1–2
REVIEW ARTICLE
Fundamentals and recent progress of additive manufacturing-assisted porous materials on transpiration cooling
J. Glob. Power Propuls. Soc. 2023;Special Issue: Some advances in additive manufacturing for aerothermal technologies:19–48
ORIGINAL ARTICLE
Variability in additively manufactured turbine cooling features
J. Glob. Power Propuls. Soc. 2023;Special Issue: Some advances in additive manufacturing for aerothermal technologies:3–18
ORIGINAL ARTICLE
Aerothermal comparison of a diffuser hole and a slot geometry: thermal performance and jet stability
J. Glob. Power Propuls. Soc. 2023;7:211–221
ORIGINAL ARTICLE
Aerodynamic influence of rim seal purge flow injection on the main flow in a 1.5-stage axial turbine with nonaxisymmetric end wall contouring
J. Glob. Power Propuls. Soc. 2023;7:153–165
ORIGINAL ARTICLE
Turbulence anisotropy analysis at the middle section of a highly loaded 3D linear turbine cascade using Large Eddy Simulation
J. Glob. Power Propuls. Soc. 2023;7:71–84
ORIGINAL ARTICLE
Numerical investigations on the unsteady leakage flow and heat transfer characteristics of the turbine blade squealer tip
J. Glob. Power Propuls. Soc. 2023;7:1–12
ORIGINAL ARTICLE
LES prediction of transitional flows in LP turbine cascades: effects of blade loading, flow phenomena and numerical setup
J. Glob. Power Propuls. Soc. 2022;6:330–342
ORIGINAL ARTICLE
Influence of honeycomb structures on labyrinth seal aerodynamics
J. Glob. Power Propuls. Soc. 2022;6:290–303
ORIGINAL ARTICLE
Flow deviation and critical choking in transonic turbine cascades operating with non-ideal compressible flows
J. Glob. Power Propuls. Soc. 2022;6:181–199
ORIGINAL ARTICLE
Unsteady simulations of deposition in a rotor passage of the first-stage turbine for an aero-engine
J. Glob. Power Propuls. Soc. 2022;6:74–87
ORIGINAL ARTICLE
Unsteady phenomena at the combustor-turbine interface
J. Glob. Power Propuls. Soc. 2021;5:202–215
ORIGINAL ARTICLE
Unsteady flow phenomena in turbine shroud cavities
J. Glob. Power Propuls. Soc. 2021;5:177–190
ORIGINAL ARTICLE
Numerical and experimental study of droplet-film-interaction for low pressure steam turbine erosion protection applications
J. Glob. Power Propuls. Soc. 2021;5:90–103
ORIGINAL ARTICLE
Flow instability effects related to purge through a gas turbine chute seal
J. Glob. Power Propuls. Soc. 2021;5:111–125
ORIGINAL ARTICLE
Characterization of manufacturing uncertainties with applications to uncertainty quantification and robust design optimization
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1–16
ORIGINAL ARTICLE
Automated detection of hot-gas path defects by support vector machine based analysis of exhaust density fields
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1–16
ORIGINAL ARTICLE
Editorial: Data-driven modelling and high-fidelity simulations
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1–2
REVIEW ARTICLE
Challenges and opportunities for artificial intelligence and high-fidelity simulations in turbomachinery applications: A perspective
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1–14
ORIGINAL ARTICLE
Sensitivity analysis on the impact of geometrical and operational variations on turbine hub cavity modes and practical methods to control them
J. Glob. Power Propuls. Soc. 2021;5:66–78
ORIGINAL ARTICLE
The required aerodynamic simulation fidelity to usefully support a gas turbine digital twin for manufacturing
J. Glob. Power Propuls. Soc. 2021;5:15–27
ORIGINAL ARTICLE
Loss assessment of the axial-gap size effect in a low-pressure turbine
J. Glob. Power Propuls. Soc. 2021;5:1–14
ORIGINAL ARTICLE
Large-Eddy Simulations of Rim Seal Flow in a One-Stage Axial Turbine
J. Glob. Power Propuls. Soc. 2020;4:309–321
ORIGINAL ARTICLE
Turbine Map Extension - Theoretical Considerations and Practical Advice
J. Glob. Power Propuls. Soc. 2020;4:176–189
ORIGINAL ARTICLE
Noise characteristics of a reduced blade count rotor with improved stage efficiency
Rainer Schädler, Dominic D. Hänni, Anestis I. Kalfas, Reza S. Abhari, Gregor Schmid, Ewald Lutum, Carsten Schneider
J. Glob. Power Propuls. Soc. 2019;3:653–667
ORIGINAL ARTICLE
Correlation between total pressure losses of highly loaded annular diffusers and integral stage design parameters
J. Glob. Power Propuls. Soc. 2018;2:388–401
ORIGINAL ARTICLE
A novel 4-sensor fast-response aerodynamic probe for non-isotropic turbulence measurement in turbomachinery flows
J. Glob. Power Propuls. Soc. 2018;2:362–375
ORIGINAL ARTICLE
Turbine blade tip aero-thermal management: Some recent advances and research outlook
J. Glob. Power Propuls. Soc. 2017;1:271–287
ORIGINAL ARTICLE
Fully turbulent discrete adjoint solver for non-ideal compressible flow applications.
J. Glob. Power Propuls. Soc. 2017;1:252–270
ORIGINAL ARTICLE
Novel high-pressure turbine purge control features for increased stage efficiency
Rainer Schädler, Anestis I. Kalfas, Reza S. Abhari, Gregor Schmid, Tilman auf dem Kampe, Sanjay B. Prabhu
J. Glob. Power Propuls. Soc. 2017;1:113–128
REVIEW ARTICLE
Prediction of the windage heating effect in steam turbine labyrinth seals
J. Glob. Power Propuls. Soc. 2017;1:84–94
ORIGINAL ARTICLE
Tip gap size effects on thermal performance of cavity-winglet tips in transonic turbine cascade with endwall motion
J. Glob. Power Propuls. Soc. 2017;1:41–54
Most read
- Month
- Year
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.