Journal Home
About the GPPS Journal
Aims and Scope
International Advisory Board
Editorial Board
Publisher
Editorial Office
Indexing and Archiving
Journal Issues
Submissions
Submission Workflow
Editorial Policies
Publication Fees
Author Guidelines
Reviewer Guidelines
CrossMark, Correction and Retraction Policy
Ethics Statement
Indexing and Archiving
Terms & Conditions
Cookie Policy
Privacy Policy
Topic Axial Compressors
ORIGINAL ARTICLE
Development of a surrogate model for uncertainty quantification of compressor performance due to manufacturing tolerance
J. Glob. Power Propuls. Soc. 2023;7:257–268
EDITORIAL
Editorial: Some advances in additive manufacturing for aerothermal technologies
J. Glob. Power Propuls. Soc. 2023;Special Issue: Some advances in additive manufacturing for aerothermal technologies:1–2
ORIGINAL ARTICLE
Comparison of LDA and hot-wire measurements at moderate subsonic mach numbers
J. Glob. Power Propuls. Soc. 2023;7:222–241
ORIGINAL ARTICLE
Variable pitch fan aerodynamic design for reverse thrust operation
J. Glob. Power Propuls. Soc. 2023;7:127–139
ORIGINAL ARTICLE
Endwall geometric uncertainty and error on the performance of TUDA-GLR-OpenStage transonic axial compressor
J. Glob. Power Propuls. Soc. 2023;7:113–126
ORIGINAL ARTICLE
Boundary layer control for low Reynolds number fan rig testing
Alejandro Castillo Pardo, Tim Stephen Williams, Christopher J Clark, Nick R Atkins, Cesare A Hall, Mark J Wilson, Raul Vazquez Diaz
J. Glob. Power Propuls. Soc. 2023;7:30–42
ORIGINAL ARTICLE
Validation and verification of RANS solvers for TUDa-GLR-OpenStage transonic axial compressor
J. Glob. Power Propuls. Soc. 2023;7:13–29
ORIGINAL ARTICLE
Transonic compressor Darmstadt - Open test case Introduction of the TUDa open test case
J. Glob. Power Propuls. Soc. 2022;6:318–329
ORIGINAL ARTICLE
Investigation of surge in a 1.5-stage transonic axial compressor
Silas Mütschard, Jan Werner, Christian Kunkel, Maximilian Karl, Heinz-Peter Schiffer, Christoph Biela, Sebastian Robens
J. Glob. Power Propuls. Soc. 2022;6:304–317
REVIEW ARTICLE
Experimental validation of a corner stall control methodology using parametrised guide fins
J. Glob. Power Propuls. Soc. 2022;6:266–278
ORIGINAL ARTICLE
Investigation of turbulence production and dissipation due to isotropic and anisotropic roughness components on real surfaces
J. Glob. Power Propuls. Soc. 2022;6:227–237
ORIGINAL ARTICLE
A new robust regenerative turbo-reactor concept for clean hydrocarbon cracking
J. Glob. Power Propuls. Soc. 2022;6:135–150
ORIGINAL ARTICLE
Characterization of manufacturing uncertainties with applications to uncertainty quantification and robust design optimization
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1–16
ORIGINAL ARTICLE
Calibration of Spalart-Allmaras model for simulation of corner flow separation in linear compressor cascade
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1–16
ORIGINAL ARTICLE
Editorial: Data-driven modelling and high-fidelity simulations
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1–2
REVIEW ARTICLE
Challenges and opportunities for artificial intelligence and high-fidelity simulations in turbomachinery applications: A perspective
J. Glob. Power Propuls. Soc. 2021;Special Issue: Data-driven modelling and high-fidelity simulations:1–14
ORIGINAL ARTICLE
Stall margin improvement in a low-speed axial compressor rotor using a blockage-optimised single circumferential casing groove
J. Glob. Power Propuls. Soc. 2021;5:79–89
ORIGINAL ARTICLE
Improvement of corner separation prediction using an explicit non-linear RANS closure
J. Glob. Power Propuls. Soc. 2021;5:50–65
ORIGINAL ARTICLE
Aerodynamic investigation of a linear cascade with tip gap using large-eddy simulation
J. Glob. Power Propuls. Soc. 2021;5:39–49
ORIGINAL ARTICLE
Investigation of the tip injection for stall control in a transonic compressor with inlet distortion
J. Glob. Power Propuls. Soc. 2021;5:28–38
ORIGINAL ARTICLE
Influence of blade vibration on part-span rotating stall
J. Glob. Power Propuls. Soc. 2020;4:285–295
ORIGINAL ARTICLE
Three-dimensional low-order surge model for high-speed axial compressors
J. Glob. Power Propuls. Soc. 2020;4:274–284
ORIGINAL ARTICLE
Assessment of the washing effectiveness of on-purpose designed eco-friendly cleaner against soot deposits
J. Glob. Power Propuls. Soc. 2020;4:253–263
ORIGINAL ARTICLE
Influence of Different Gases on the Design Point of an Industrial Axial Compressor and Deduced Aerodynamical Rematching Methodology
J. Glob. Power Propuls. Soc. 2020;4:238–252
ORIGINAL ARTICLE
Low pressure ratio transonic fan stall with radial distortion
J. Glob. Power Propuls. Soc. 2020;4:226–237
ORIGINAL ARTICLE
Impact of downstream potential perturbations on the nonlinear stability of a generic fan
J. Glob. Power Propuls. Soc. 2020;4:217–225
REVIEW ARTICLE
An overview of time-domain computational methods for aeroelastic instabilities of multi-stage compressors
J. Glob. Power Propuls. Soc. 2020;4:114–127
ORIGINAL ARTICLE
An Analytical Approach to Estimate the Effect of Surface Roughness on Particle Rebound
J. Glob. Power Propuls. Soc. 2020;4:27–37
ORIGINAL ARTICLE
Influence of Blade Aspect Ratio on Axial Compressor Efficiency
J. Glob. Power Propuls. Soc. 2019;3:639–652
ORIGINAL ARTICLE
Effects of Stator Platform Geometry Features on Blade Row Performance
J. Glob. Power Propuls. Soc. 2019;3:609–629
ORIGINAL ARTICLE
The sensitivity of 3D separations in multi-stage compressors
J. Glob. Power Propuls. Soc. 2018;2:329–343
REVIEW ARTICLE
PIV measurements of the transient flow structure in the tip region of a transonic compressor near stability limit
J. Glob. Power Propuls. Soc. 2017;1:303–316
ORIGINAL ARTICLE
Fully turbulent discrete adjoint solver for non-ideal compressible flow applications.
J. Glob. Power Propuls. Soc. 2017;1:252–270
ORIGINAL ARTICLE
Numerical method for an assessment of steady and motion-excited flowfields in a transonic cascade wind tunnel
J. Glob. Power Propuls. Soc. 2017;1:171–183
Most read
- Month
- Year
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.